H3Droid - Android image developed specifically to work on Allwinner H3 devices

kotcza

please read the http://h3droid.com/faq

goondu

tried version 1.3.2 on orange pi pc. the box will auto shut down after continuously  playing video for about 20 minutes. anyone  else observing what i had observed?

pmpp

goondu replied at 2017-10-30 00:16
tried version 1.3.2 on orange pi pc. the box will auto shut down after continuously  playing video f ...

Hi goondu , what type of video were you playing ( size / video AND audio codec ) and with what software ( spmc, tvdplayer, ... ? ) . If your board is in a case : has it a heatsink and/or a fan , and would you mind to try outside of case then ?
As a general rules software crashes  happen in less than a minute.  memory leaks or hardware crashes on the long run.

goondu

pmpp replied at 2017-10-30 12:47
Hi goondu , what type of video were you playing ( size / video AND audio codec ) and with what sof ...

Thanks for your response.My OrangePi PC was housed and tested in a casing.
I am now stress testing the video streaming with another OrangePi PC board [without a casing] with another sdcard. I will update my observation.


My first OrangePi PC board [with a casing] was now not with me, so I can't do further test. However the following were observed:
a. that the red on board led light will flicker every few seconds. [Unlike my second board, whereby I always have a solid green on board led light]
b. the video stop after continuously play for approximately 20 minutes [can only make further test, once I have the first board back]

I had streamed both live TV [via an Android app] and movies [via UC browser], and in both instances, the streaming will stop after having continuously played for a while. The casing is noticably warm.

Thanks

flyingbaloon

Hi , I am using the official 5 inch lcd on orange pi pc plus . Could someone please guide me about how to get a touchscreen module  to work with it  . Please give me details about the touchscreen drivers that are supported in h3droid  and the connections if possible . Thank you for your help

pmpp

Hi, @flyingbaloon for such tech advice you may want to come on webchat (or freenode irc #H3Droid )  we are reluctant to post links here about hardware since some screens accessories vendors are scammers.
Please specify the number of simultaneous fingers for touchscreen 1 ( resistive ) 5/10(capacitive) these are (very) different technologies and prices ...

goondu

why when using it on nanopi m1, the screen can't  go full screen? anyway to make the display full screen?

pmpp

goondu replied at 2017-11-6 02:51
why when using it on nanopi m1, the screen can't  go full screen? anyway to make the display full sc ...

Hi, Could you describe the screen and possibly a give pointing where you bought it ?
Decent HDMI display have scalers units and they always manage full screen.         

As a general rule : AVOID 7" 800x480 SCREENS that have no scaler and make black borders.  H3Droid is 16/9 16/10 only and we don't have funding to buy some and try to support them.


PS: i know it is a warm nice place here and all but maybe http://www.friendlyarm.com/Forum/viewtopic.php?f=50&t=655 is more suited for nanopi :p, btw funding remark apply to nanopi boards too.

shevan86

Hi. Great project. Thank you!

I have a problem with orange pi+2e. Android does not boot when the power fails or when I turn off the power. An empty pink screen is displayed. Reboot is normal (Only until the problem occurs).
I use an HDMI to VGA adapter.

The latest version of the h3droid script and all the previous ones.

I would really appreciate your help.

pmpp

Hi @shevan86, juste paste the content of pastebin text in a file called /data/rc.local  to fix the pink screen problem :

https://pastebin.com/raw/08mTkFH0