Openelec Build for OPI PC and 2 now with HW decoding

pmos69 · Published in 2016-2-26 04:50:46

Edited by pmos69 at 2016-2-26 05:05

Compiled latest (clean start).
I'm now getting much higher CPU temperatures than with my previous image:

...
[ 1330.170119] CPU Budget: Temperature: 70 Limit state:1 item[1200000,4,-1,0 0]
[ 1330.170146] [ddrfreq] temperature=70 C, ddr freq up
[ 1330.184497] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 648000
[ 1330.680101] CPU Budget: Temperature: 69 Limit state:0 item[1296000,4,-1,0 0]
[ 1330.680130] [ddrfreq] temperature=69 C, ddr freq up
[ 1331.180111] CPU Budget: Temperature: 70 Limit state:1 item[1200000,4,-1,0 0]
[ 1331.180133] [ddrfreq] temperature=70 C, ddr freq up
[ 1331.184202] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 648000
[ 1331.680074] CPU Budget: Temperature: 69 Limit state:0 item[1296000,4,-1,0 0]
[ 1331.680093] [ddrfreq] temperature=69 C, ddr freq up
[ 1332.680111] CPU Budget: Temperature: 71 Limit state:1 item[1200000,4,-1,0 0]
[ 1332.680135] [ddrfreq] temperature=71 C, ddr freq up
[ 1332.685873] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 648000
[ 1333.680113] CPU Budget: Temperature: 69 Limit state:0 item[1296000,4,-1,0 0]
[ 1333.680138] [ddrfreq] temperature=69 C, ddr freq up
[ 1336.190140] CPU Budget: Temperature: 70 Limit state:1 item[1200000,4,-1,0 0]
[ 1336.190168] [ddrfreq] temperature=70 C, ddr freq up
[ 1336.197354] CPU Budget:update CPU 0 cpufreq max to 1200000 min to 648000
...

Copy code

Going to boot previous image to compare.
Edit: Nah. Seems about the same.

Dahaka06 · Published in 2016-2-26 05:06:20

How to enable surround sound in AV-RECEIVERS?
I have a Denon AVR -1311 and HDMI sound is only MULTI IN(Double Stereo).

jernej · Published in 2016-2-26 05:28:50

Dahaka06 replied at 2016-2-25 22:06
How to enable surround sound in AV-RECEIVERS?
I have a Denon AVR -1311 and HDMI sound is only MULTI ...

Sound drivers are badly written, so there is great chance that the answer is "you can't". But maybe someone else has found the way?

jernej · Published in 2016-2-26 05:31:19

ParadoxX27 replied at 2016-2-25 06:30
Jernej, Please, update image in the sticky thread.

I usually put there a link when someone else publishes images in this thread. I stopped uploading precompiled images except for testing.

Dima · Published in 2016-2-26 05:35:03

I'm going to compile a 100% clean image tomorrow morning.

jernej · Published in 2016-2-26 05:47:54

tkk replied at 2016-2-25 18:03
About the HDMI-CEC support, is someone working on it currently? If not, I might take a look. I have ...

Help would be really apreciated. However state about CEC is very bad, unfortunately. Driver, which you referenced, is for older devices like A13 and A20 and is complete work in progress. H3 has different HDMI controller and there is absolutely no documentation about it. Currently, we (well, at least I) don't even know where CEC register is in memory. As you can see, driver, which you referenced, actually bitbangs CEC pin. It is really a special GPIO pin mapped in different register. I assume that situation is the same on H3, but I might be wrong. There is at least one Android ROM which has working CEC. However, it seems that driver completely bypass any HDMI stuff by actually using one GPIO pin for communication. You can read more here: http://www.orangepi.org/orangepi ... wthread&tid=647

pmos69 · Published in 2016-2-26 05:48:59

Edited by pmos69 at 2016-2-26 06:00

Here's a clean image I compiled from scratch today: http://www.megafileupload.com/6a ... -r1-gf32cae9.img.gz

Edit: for the Orange Pi PC

jernej · Published in 2016-2-26 05:50:36

pmos69 replied at 2016-2-25 22:48
Here's a clean image I compiled from scratch today: http://www.megafileupload.com/6ar1/OpenELEC-H3.a ...

Thanks, but it is hard to tell for which device

pmos69 · Published in 2016-2-26 06:00:25

jernej replied at 2016-2-26 05:50
Thanks, but it is hard to tell for which device

OPi PC

jernej · Published in 2016-2-26 06:20:28

thc013 replied at 2016-2-25 18:30
the 1 cpu 100% bug from systemd or cma is still there

compiled again from scratch and it is still ...

Ok, maybe there is a problem with boot parameters. Can you check the contents of /proc/cmdline? There should be "noram" at the end. If it's not, kswapd will go to 100%.