Openelec Build for OPI PC and 2 now with HW decoding

jeevasv · Published in 2016-2-20 05:41:24

I updated the Images and script.bins in the usual location.

Jernej, Please change the date to 19-02-2016 in the sticky thread

TvNot · Published in 2016-2-20 13:28:15

Edited by TvNot at 2016-2-20 13:38

I download and install to OrangePi-PC images OpenELEC-H3.arm-7.0-devel-20160219125257-r22069-gb078757.img.
Everything is good.
But there is one question:
How to enable analog TV out?

То script.fex write:

[boot_disp]
advert_disp    = 1
auto_hpd       = 1
output_type    = 2
hdmi_channel = 0
hdmi_mode    = 4
cvbs_channel = 1
cvbs_mode    = 11
output_full    = 1
hdmi_mode_check = 1

[disp_init]
disp_init_enable       = 1
disp_mode             = 1

screen0_output_type    = 3
screen0_output_mode    = 2

screen1_output_type    = 2
screen1_output_mode    = 11

fb0_format             = 1
fb0_width             = 0
fb0_height             = 0

fb1_format             = 0
fb1_width             = 0
fb1_height             = 0

This config works on Lubuntu. Isn`t work on Openelec

nightflasher · Published in 2016-2-20 17:41:50

hey TvNot: try this link http://linux-sunxi.org/Fex_Guide#tv_out_dac_configuration or this one http://linux-sunxi.org/Fex_Guide#tv_configuration

jernej · Published in 2016-2-20 18:30:10

Edited by jernej at 2016-2-20 11:51

Ok, sticky thread is updated.
I would recommend this update to everyone and that whole image is burned on sd card. I made some U-Boot updates - newer version, enabled CPU voltage regulator, which should make boot more reliable, enabled USB and SATA on OPiPlus and power led is lit.

Also DVB drivers are updated from media_build.

jernej · Published in 2016-2-20 18:52:56

TvNot replied at 2016-2-20 06:28
I download and install to OrangePi-PC images OpenELEC-H3.arm-7.0-devel-20160219125257-r22069-gb07875 ...

Tv out is not yet supported with my Kodi patch. Even if you set script.bin to tv out, you would get black screen.

Galeots · Published in 2016-2-20 20:29:55

Hi
cec hdmi no work for openelec!?

well0ne · Published in 2016-2-20 21:02:38

Galeots replied at 2016-2-20 20:29
Hi
cec hdmi no work for openelec!?

No, if you read the thread rightly, you would have been knowing that.

actually its not possible.
Use the search function or look inside the thread before asking the same as many others.

maybe we should do a sticky post or a faq post...

jernej · Published in 2016-2-20 22:48:31

well0ne replied at 2016-2-20 14:02
No, if you read the thread rightly, you would have been knowing that.

actually its not possible.

This is already stated in FAQ, but what can we do if people don't read it.

tomkowski · Published in 2016-2-21 05:42:50

Hi again,

The LAN and USB ports still don't work in the new build (20160219). On OPi+ off course.

jeevasv · Published in 2016-2-21 15:06:42

tomkowski replied at 2016-2-21 05:43
Hi again,

The LAN and USB ports still don't work in the new build (20160219). On OPi+ off course.

Did you try burning the .img file or just replaced SYSTEM and KERNEL files?