Linux Distributions for Orange PI H3 boards

syed.iddi

The latest packages most of them except raspbian doesn't detect the ethernet connection..

Getting this error

Creating object for path '/org/freedesktop/NetworkManager/ActiveConnection/0' failed in libnm-glib

syed.iddi

loboris replied at 2015-10-1 19:21
copy the downloaded firmware.tar.gz to /lib
-rw-rw-r-- 1 boris boris 8192 Lis  1 10:03 rt2561.bin
- ...

All the linux images doesn't detect ethernet.
Getting this msg,

Creating object for path '/org/freedesktop/NetworkManager/ActiveConnection/0' failed in libnm-glib.


any idea how to fix it?

Fabrixio1

Thanks @loboris for the kernel sources, The wifi AP6212 works now.

I have this error yet:

Oct  3 06:25:31 localhost kernel: [ 8000.148942] [cpu_freq] ERR:set cpu frequency to 1200MHz failed!
Oct  3 06:28:25 localhost kernel: [ 8171.966410] [ARISC ERROR] :message process error
Oct  3 06:28:25 localhost kernel: [ 8171.971747] [ARISC ERROR] :message addr   : f004b840
Oct  3 06:28:25 localhost kernel: [ 8171.977361] [ARISC ERROR] :message state  : 5
Oct  3 06:28:25 localhost kernel: [ 8171.982232] [ARISC ERROR] :message attr   : 2
Oct  3 06:28:25 localhost kernel: [ 8171.987167] [ARISC ERROR] :message type   : 30
Oct  3 06:28:25 localhost kernel: [ 8171.992113] [ARISC ERROR] :message result : ff
Oct  3 06:28:25 localhost kernel: [ 8171.997037] [ARISC WARING] :callback not install

Some idea how to correct them?

Thanks.

jacer

loboris replied at 2015-9-30 16:05
Try tu use the latest pyhoca-gui (0.5.0) or x2go client.
I think that i've tried that MT7601 sourc ...

The mate image is working with this x2go client. Care to make this wifi dongle workig? It is working with rasperberry pi.Bus 004 Device 002: ID 0bda:8176 Realtek Semiconductor Corp. RTL8188CUS 802.11n WLAN Adapter

lukish

loboris replied at 2015-10-1 02:07
The driver for CH341 USB->Serial is in the kernel sources, I've compiled it and I'll upload it tom ...

loboris, what's the progress with the module?

on4top

Would love to have  script.bin for  1440×900 & 1680×1050 resolutions  ( older 16:10 monitor )

Also usb_cdc support in kernel ..would be nice ..

Vinion

loboris replied at 2015-10-2 17:08
For 800x480 resolution to work, the kernel sorces must be modified to.
I have the working kernel an ...

Thank you for your reply.

I dont care sto much for the colors. I just need the display to work

jacer

RTL8188CUS and rt3070 are not working with the firmware but rtl8188eus/etv worked with two wifi interface.

loboris

KERNEL UPDATE (EXPERIMENTAL)
Uploaded scriptbin_kernel_test.tar.gz which contains the kernel with some new features:
mali kernel drivers (ump,mali,drm,mali_drm), 1wire, CH341 USB->Serial, cdc-acm, 800x480 support (uncomplete) ...

The kernel is not fully tested yet, please backup your old files/directories before upgrading.

To upgrade:

• download scriptbin_kernel_test.tar.gz from Mega or GoogleDrive, unpack
• copy uImage and script.bin for your board type to the fat partition
• delete the old /lib/modules/3.4.39 directory
• copy lib directory from the archive to the linux partition
• run: sudo depmod -a
• reboot
  

loboris

@lukish, @on4top, try the new kernel