OrangepiMini Lubuntu

RaveenBouy · Published in 2015-3-10 22:45:08

Well, My Pi works perfectly with this http://www.aliexpress.com/store/ ... 71_32281484383.html Power adapter (which i bought from the same company). Also it says the output is 5V, 3A :C

DigitalToys · Published in 2015-3-11 15:59:04

Interesting, it is sold as 2A, but has 3A printed on it... still I assume that 2A PSUs do not supply enough power.

zhao_steven · Published in 2015-3-12 05:17:40

Orange pi mini user manual has be updated.

david · Published in 2015-3-20 18:29:13

I used another power charger - output DC 5V, 3.1A - but still no boot Lubuntu.. after cca 4 second power off

Some ideas? Thx

RaveenBouy · Published in 2015-3-21 23:02:32

david replied at 2015-3-20 18:29
I used another power charger - output DC 5V, 3.1A - but still no boot Lubuntu.. after cca 4 second p ...

Have you tried booting from Android ?

gaara · Published in 2015-3-22 00:44:33

Edited by gaara at 2015-3-22 10:14

Interesting, it is sold as 2A, but has 3A printed on it... still I assume that 2A PSUs do not supply enough power.

Hi,
I'm using a 2A power supply (from here) and all works properly.
Edit: As Steven says, I don't use the mini USB but a yellow Jack cable to power the board. I have also a class 10 SD card.

zhao_steven · Published in 2015-3-22 05:36:39

Orange Pi only need 1.3a max at starting instant. But AXP209 limit 900ma through Mirco usb otg port. This is reason. Other reason micro sd need really scandisk class 10 TF card.

david · Published in 2015-3-25 21:59:43

Ok. In this case, this does not make sense in specs -> Power: 5V @ 2A via MicroUSB (DC in Only) and/or MicroUSB (OTG). If i need 1,3A for start I can not use MicroUSB for Orange Pi power... because through micro USB is limit 900mA. I say it right?

OrangepiMini Lubuntu

Viewed section