Support for 1360x768@60Hz resolution/refresh rate

andreq · Published in 2016-6-15 22:04:20

Edited by andreq at 2016-6-15 22:05

justiceiro replied at 2016-6-14 03:01
Sorry, it had to be done. I will try to work out everything, but i have some questions.

I will ne ...

I can help on the setup to build your own image :
Follow the basic step here to setup a Linux Virtual box and install GIT and other stuff :
https://github.com/igorpecovnik/lib You don't need to get igorpecovnik branch, stop after you install GIT.

You should then be able to follow #10 here http://www.orangepi.org/orangepi ... 1077&extra=page%3D1

You'll probably have some error about device tree compiler (it's written on #10, but I was blind).
sudo apt-get install device-tree-compiler
Hope this help!

jernej · Published in 2016-6-16 01:26:53

If anyone cares, here are additional resolutions. I would accept patch which adds them as a new entry, not modified, as it is currently done in those commits:
https://github.com/dni1337/OrangePI-Kernel/commits/master

justiceiro · Published in 2016-6-20 09:29:55

Edited by justiceiro at 2016-6-20 10:06

Sadilly, thing are not as simple as i thougth. It seems that i also need to make changes in the files that jernej mentioned, but the values are somewhat different. It took me the entire day, but i finally found out the meaning of most of them here:
https://lists.freedesktop.org/ar ... January/098588.html
and some of them in here:
http://www.orangepi.org/orangepi ... =viewthread&tid=444

using the example given by jernej, i made the same changes, and created the pacth. But, upon tryign to compile, i got the following errors:
edit: there is a possibility that i simply run out of space during compilation. had to create a 10 GB extra partition

justiceiro · Published in 2016-6-21 19:58:21

Ok, after 2 day, i finally compiled everything, but how do i change the script.bin?

jernej · Published in 2016-6-21 23:33:51

using sunxi tools on host computer. bin2fex and fex2bin

justiceiro · Published in 2016-6-22 07:56:08

jernej replied at 2016-6-21 23:33
using sunxi tools on host computer. bin2fex and fex2bin

And where i get the file and how i put back?

jernej · Published in 2016-6-22 12:14:16

script.bin on fat32 partition on sd card?

hav · Published in 2016-6-25 21:00:35

Please could give me the script.bin to 1360x768@60Hz. Thank you very much.

jernej · Published in 2016-6-26 17:01:40

hav replied at 2016-6-25 14:00
Please could give me the script.bin to 1360x768@60Hz. Thank you very much.

Unless justiceiro manages to make additional resolutions work, you will have to find screen which support standard 720p or 1080p resolution.

hav · Published in 2016-6-26 20:52:30

I thought that I had ready the .bin

Support for 1360x768@60Hz resolution/refresh rate

EDIT