[SOLVED] Move to Emmc

jernej · Published in 2016-3-1 01:02:38

campioncino replied at 2016-2-28 13:04
Openelec is a Read-Only File System, it would be nice if it could be opened (so we can create folde ...

The easiest way to change anything of this is probably to change build system and build your own image. For example, you can change password here: https://github.com/jernejsk/Open ... penELEC/options#L15 But as lymon said, many things can be done in /storage folder, especially configuration of the system.

jernej · Published in 2016-3-4 04:15:16

Can anyone try to build latest image and test it on OPiPlus? I enabled NAND driver which is the first step in making booting from eMMC possible. I would like to get at least whole output of dmesg and "ls /dev". If there is a line in dmesg "[NAND]nand driver is disabled", be sure that latest script.bin is used.

campioncino · Published in 2016-3-4 23:07:21

Edited by campioncino at 2016-3-4 23:08

jernej replied at 2016-3-4 04:15
Can anyone try to build latest image and test it on OPiPlus? I enabled NAND driver which is the firs ...

I'll try.... it's my first time

Where I can find the image?

jernej · Published in 2016-3-4 23:11:42

Currently, there is none. You have to build it yourself. It's not hard

campioncino · Published in 2016-3-4 23:28:53

jernej replied at 2016-3-4 23:11
Currently, there is none. You have to build it yourself. It's not hard

is there any guide to follow?

jernej · Published in 2016-3-4 23:32:50

campioncino replied at 2016-3-4 16:28
is there any guide to follow?

Yes, open FAQ and check questions number 9. Please note that this takes long time for first build.

campioncino · Published in 2016-3-5 00:08:20

Edited by campioncino at 2016-3-5 00:11

Resuming:
1) First of all i'll clone the git
2) than i'll build with

PROJECT=H3 DEVICE=xxx ARCH=arm scripts/clean u-boot

(on ubuntu)
3) i'll tell you the output of dmesg and "ls /dev"

that's correct?

jernej · Published in 2016-3-5 00:26:56

Edited by jernej at 2016-3-4 17:33

Not exactly, second step must be:

PROJECT=H3 DEVICE=xxx ARCH=arm make image

Copy code

your second step is for building images for different boards AFTER "make image". Any suggestions to make this more clear in FAQ?

EDIT: make sure that you replace "xxx" with your board name, OPiPlus

campioncino · Published in 2016-3-5 00:35:53

Edited by campioncino at 2016-3-5 01:11

I apologize, i read it too much quickly ...
The FAQ are pretty clear

I'm Building....

jernej · Published in 2016-3-5 02:38:03

Ok, so anyone who is interested in this. I mixed up NAND and eMMC. There is clear distinction. I will try to enable it as soon as I get Plus board.