remote control with OpenELEC ?

andrzejm · Published in 2016-3-11 17:03:21

Edited by andrzejm at 2016-3-12 02:26

Are also RF remotes supported or is it only IR?
I'm trying to connect Medion X10 Slim OR25V RF remote but with no luck.
Kodi in debug does not detect keystrokes - I think additional driver may be required.

jernej · Published in 2016-3-12 15:20:58

andrzejm replied at 2016-3-11 10:03
Are also RF remotes supported or is it only IR?
I'm trying to connect Medion X10 Slim OR25V RF remot ...

Is it otherwise supported in any other kodi like on RPi or destop linux?

andrzejm · Published in 2016-3-12 22:40:38

Edited by andrzejm at 2016-3-17 23:52

It is supported on OpenELEC 6.0.3 x86_64 (tested on my PC)
I've compared lsmod before and after attaching receiver and those modules are additionally loaded:
Module                Size  Used by
rc_medion_x10_digitainer    1282  0
ati_remote             7040  0
rc_core             14087  3 ati_remote,rc_medion_x10_digitainer

I did insmod rc-medion-x10-digitainer.ko and ati_remote.ko on OPPlus but can't find rc_core and remote is not working
dmesg dump stack after attaching receiver to OPPlus: http://xbmclogs.com/piqmnr3dn
Full dmesg: http://xbmclogs.com/pp95agxq1

andrzejm · Published in 2016-3-18 07:54:08

I understand it's background priority but can I do anything which would help to investigate?

jernej · Published in 2016-3-18 13:21:27

According to your logs, driver is there. Only problem is that it crashes. I don't have such hardware and if I did, I would be still pretty clueless what to do. You can try to debug what is wrong if you know how. The only thing I can rememeber is that you could disable media_build in projects/H3/options and try to rebuild and test.

pmos69 · Published in 2016-3-18 19:57:04

andrzejm replied at 2016-3-11 17:03
Are also RF remotes supported or is it only IR?
I'm trying to connect Medion X10 Slim OR25V RF remot ...

Mele F10 works fine

andrzejm · Published in 2016-3-20 19:57:32

Edited by andrzejm at 2016-3-20 17:38

It does work without media_build!
Thank you jernej

I'll try to look into to find out root cause but I'm not sure if I will be able to find it.

sabrina · Published in 2016-4-1 03:25:02

Edited by sabrina at 2016-4-1 03:26

I just received my Orange Pi.

I install OpenELEC-H3.arm-7.0-devel-20160309212704-r22307-g661c2cf.img

I followed the tutorial and when I reboot the orange Pi since Putty SSH, the remote control does not work.

I tried 3 remote control and I have the same result.

When I check if everything is recorded and that I type: nano /storage/.config/my_remote

I have the commands:

0x80529058 KEY_UP
0x80529059 KEY_DOWN
0x8052105a KEY_LEFT
0x8052905b KEY_RIGHT
0x8052905c KEY_SELECT

The file autostart file is also created:

nano /storage/.config/autostart.sh

I have written:

ir-keytable -c -p NEC, RC-5, RC-6, JVC, SONY, LIRC, OTHER -w /storage/.config/my_remote

I try several remotes not working.

Can you help me please

sabrina · Published in 2016-4-2 03:05:53

Edited by sabrina at 2016-4-2 03:10

Tout fonctionne avec un autre tuto.
vous pouvez le trouver à cet endroit:
Everything works with another tutorial.
you can find it at this location:

http://www.alessandrocolla.com/c ... ntrol-openelec-5-0/

I share my configuration of the Microsoft remote.
http://cl.ly/2l2Q3x1v371K/remote%20microsoft%20openelec.zip

manatouboji · Published in 2016-4-5 15:49:10

It seems don't support HDMI CEC remote?