Openelec Build for OPI PC and 2 now with HW decoding

jernej · Published in 2017-1-9 07:35:32

Then I really don't know what's wrong. Kernel is the same for all boards. Maybe you can check loaded modules with lsmod and make sure that hdmi_cec is listed.

jernej · Published in 2017-1-10 04:28:28

PlintuZz replied at 2017-1-9 00:32
esd20 was absent from the factory, opi plus v1.1

Another thing - can you please send detailed photos (top & bottom) to check for any visual clues?

PlintuZz · Published in 2017-1-10 14:11:20

jernej replied at 2017-1-10 04:28
Another thing - can you please send detailed photos (top & bottom) to check for any visual clues?
...

https://yadi.sk/d/RBiLkZ-6388L3a

Demetris · Published in 2017-1-10 21:46:09

Edited by Demetris at 2017-1-10 21:47

Hi community, for owners of OPI-PC you can find here the final OpenELEC-7.0
Image: http://d-h.st/p2PW
Upgrade: http://d-h.st/aWIz

jernej · Published in 2017-1-11 05:05:43

PlintuZz replied at 2017-1-10 07:11
https://yadi.sk/d/RBiLkZ-6388L3a

I checked every important part for CEC and they seems to be connected exactly where they should be. I also measured values on my board and they match schematic. All traces seems to be correct also. So something strange is happening. Unfortunatelly I don't have CEC capable device so I can't really make additional test.

I suggest you measure voltage between GND pad (left of power connector) and 3_3V pad (under 40 pin connector). I'm not sure which value qualifies as good enough, but it should be pretty close to 3.3V. If it is not, please try another power supply.

Anyone,
please report if CEC works for you (even slightly) and on which board.

Poxucis · Published in 2017-1-12 01:48:44

Worked for me when i was using OpenELEC on OpiPC with Samsung TV.

PlintuZz · Published in 2017-1-13 06:09:52

jernej replied at 2017-1-11 05:05
I checked every important part for CEC and they seems to be connected exactly where they should be. ...

Please tell me.
I wrote to the seller about the problem, he wrote to me: "Could you plz provide us the debug info to check?" what he wants and how to do it?

the other power supply unit I tested, did not help.
I try one of these days, test the circuit for cec line.
elec when turned on, displays the connection to the adapter, and then vanishes, TV at the moment writes an unknown device.
on OPI when turn on writes to the connection adapter - is connected to a TV, the TV shows the player BD

PlintuZz · Published in 2017-1-13 06:11:40

Poxucis replied at 2017-1-12 01:48
Worked for me when i was using OpenELEC on OpiPC with Samsung TV.

opi pc also worked with lg
opi pc plus not work(

jernej · Published in 2017-1-13 06:20:30

PlintuZz replied at 2017-1-12 23:09
Please tell me.
I wrote to the seller about the problem, he wrote to me: "Could you plz provide us ...

I would explain which board (including revision number) worked with which OpenELEC image (include link) and which didn't. Write exact TV model. Try to test on another TV. Stop kodi with "systemctl stop kodi" and play with cec-client console program. Mention that there were multiple reports of same issue with same board in this topic...

Basically, include description how to reproduce the issue and describe as detailed as possible what did you try do to show that board is faulty.

jernej · Published in 2017-1-13 07:15:10

All,
please test this update for channel switching bug. Today I received the newest libraries for video decoding, which have a slightly different memory management.
https://transfer.sh/aMDip/openel ... 3261-ge328780e4.tar

I just want to know if issue is better/worse/solved. These libraries will be used eventually, I just want avoid regressions.