(SOLVED) Enable sata

Galeots · Published in 2016-2-10 05:51:08

Edited by Galeots at 2016-2-26 03:47

I found that they disabled the sata because they are too slow, give me a hand to enable it ?!
by script.bin not work because missing diver.
I can not figure it out!
Use orange pi plus 2 of OpenELEC
anybody with my problem?

jernej · Published in 2016-2-12 02:09:59

I can speak only for PLUS version (not "PLUS 2"), but I suppose it is the same. Please check if it is.

On OrangePi PLUS there is no need for any special driver, because it uses GL830 (USB to SATA). Oh manufacturer site the following is stated:

Complies with USB Storage Class specification ver.1.0. (Bulk only protocol)

If ordinary USB Flash dongle is working, then also SATA port should work.

Can you check markings on SATA chip (the only chip on the bottom)?

Galeots · Published in 2016-2-12 03:16:09

jernej replied at 2016-2-12 02:09
I can speak only for PLUS version (not "LUS 2"), but I suppose it is the same. Please check if it i ...

Thank you for answering!
use the GL830 but it seems that not all drivers loads!
I added to this script.bin shorthanded!
However after enabling not delivering the 5 volts for even sata!
[Sata_para]
sata_used = 1
sata_power_en = port

B08<1><default><default><0>

jernej · Published in 2016-2-12 03:23:48

Can you find a schematics for PLUS 2?

Galeots · Published in 2016-2-12 03:26:15

jernej replied at 2016-2-12 03:23
Can you find a schematics for PLUS 2?

Yes!
you use kodi of plus !?
then you work sata hdd !?
I have to assemble me hand hdd

jernej · Published in 2016-2-12 03:32:51

Ok, let's continue to talk only in this thread.

First, I want output of following commands:
dmesg
lsusb
cat /dev

Then, tell me, on which other Linux (NOT OpenELEC), did you try your SATA and it WORKED?

You also showed me schematics of PLUS, not PLUS 2. Are you sure that they are the same?

Galeots · Published in 2016-2-12 03:56:39

Edited by Galeots at 2016-2-12 04:01

jernej replied at 2016-2-12 03:32
Ok, let's continue to talk only in this thread.

First, I want output of following commands:

they are the same thing just changes mmc e ram!
I wanted to try debian server, but I do not charge!
the screen remains black!

OpenELEC:~ # lsusb
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 002 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

jernej · Published in 2016-2-12 04:09:07

Please find one other Linux distribution which works, otherwise I can't help you because I don't have PLUS 2 board.

jernej · Published in 2016-2-12 05:47:44

Galeots replied at 2016-2-11 20:56
they are the same thing just changes mmc e ram!
I wanted to try debian server, but I do not charge! ...

Test this: https://mega.nz/#!NMpXVTjD!-HMbqLjuDPgf6CGf-1jkIaIrFID1GAK_laZdxn6pXCY

Galeots · Published in 2016-2-12 07:14:52

Edited by Galeots at 2016-2-12 07:22

jernej replied at 2016-2-12 05:47
Test this: https://mega.nz/#!NMpXVTjD!-HMbqLjuDPgf6CGf-1jkIaIrFID1GAK_laZdxn6pXCY

does not work is the power sata and sata
you can fill kodi step by step and load the necessary drivers !?

(SOLVED) Enable sata

This thread contains more resources