OrangePi Zero stoped working after one week

tobiasBora

Hello,

I received the OrangePi Zero from Aliexpress, and tried to put on it the Armbian image. It worked like a charm. I let it opened during one week, and when I came back my OrangePi was unreachable with ssh. So I tried to reboot, but the LEDs on the Ethernet cable does not blink : they stay orange and green (while before they were blinking at startup). I tried to change the SD Card, change the power supply, I tried tons of different image (armbian, fedora, ubuntu server...), and no one work now.

Do you know what happened ? Is it definitely broken ? Am I the only one that got a weak OrangePi Zero ?

Thank you in advance,

TobiasBora.

Tina

Hi,
If you have a USB to TTL (UART) adapter, you could have a look at it's output, if any. Further you can check the 5V and 3.3V rail at the GPIO/13pin with a voltmeter. Pinout see here: http://www.orangepi.cn/orangepib ... light=zero%2Bpinout

It sounds to me your OPI zero is broken, but only if you check the UART output or you have no voltage at the 5/3.3V rails, it can be said for sure.
Unfortunately Xunlong is avoiding questions about warranty
If you have still the possibility to raise a dispute on Aliexpress, I suggest you do that asap, as you have only 15 days after you confirmed the goods received.

ctigs

did it have a heatsink?  the H3 chips run really hot and should have one.