Patch for OrangePi PC2 GPIO can't use

Buddy · Published in 2017-4-7 10:30:30

On OrangePi PC2 board, we can use GPIO as above

The patch is used to export GPIO port on /sys/class/gpio_sw/

How to
1. Download and decompress Patch.tar
2. Update boot0.bin and uboot.bin on /dev/sdx, Note! "/dev/sdx" is device node of SDcard

dd bs=1024 seek=8 if=boot0.bin of=/dev/sdx
dd bs=1024 seek=16400 if=uboot.bin of=/dev/sdx

Copy code

3. Update dts
Copy OrangePiH5orangepi.dtb into /media/xxx/BOOT/orangepi
4. Plug SDcard and reboot OrangePi PC2.

hojnikb · Published in 2017-4-7 20:29:40

Any word on mali curruption fix on the ubuntu image ?

Also, any chance dvfs will be fixed ?

MadMax2 · Published in 2017-4-8 05:50:32

I noticed that there is a new android image on the allwinner site. Do you plan to update the image for the PC2? Software support is very poor, it would not take that much effort to provide a decent android image with google play and support for most common wifi dongles.

johnybe · Published in 2017-5-11 21:34:32

Edited by johnybe at 2017-5-12 16:13

How can I use this patch on Armbian (installed and updated without any customization)?

Patch for OrangePi PC2 GPIO can't use

This thread contains more resources

Viewed section