Improving Android 5.1 image for OpiPC2 H5

Shikid

Xeph20 replied at 2017-2-18 09:49
I tried installing Android several time and the times it worked android is very very slow and apps c ...

Hi, guys!
You could try using my image - I have done it for myself - so there are a lot of unnecessary soft but anyway you can try my version - there are working GAPPS, root and a lot of alternative app-markets.

Here is the link: Link for the torrent file

P.S. Currently i am trying to add some support of these wifi adapters - COMFAST CF-WU720N and COMFAST CF-WU755P - if someone have that adapters and can fix my image to support them out of the box - please do so and load this image into the google drive or torrent.

Xeph20

Shikid replied at 2017-2-20 02:16
Hi, guys!
You could try using my image - I have done it for myself - so there are a lot of unnecess ...

thank you very much! petty its a 16gb image though and not compressed so a huge download is there a way to make the img smaller to fit on 8gb card?
how do you backup the sd to img? and is your img rooted ?

others are also welcome to share their roms

Shikid

Xeph20 replied at 2017-2-20 08:53
thank you very much! petty its a 16gb image though and not compressed so a huge download  is ther ...

My image is already rooted and it was made for 16gb microSD. For backup I have used win32Diskimager tool, so you can easilly flash that image to sd with the same tool. You can make a partition resizing with help of Gparted or similar tool to get a proper size.
You can try this image as well: 4PDA forum version - it is much smaller, but rooted in a slightly different way. So it is up to you what version to use.

MadMax2

Shikid, you were not kidding about the extra software installed! You were not that smart and you did not delete your gmail and skype acounts. You might want to change your passwords. Too much software for me , temp went to 65 C with all the apps running in the background. I would certainly try a version without all the bloat, it did have some neat tweeks.

thc013

https://pan.baidu.com/share/link ... &parentPath=%2F

there is a new image with google play

only wrong fex

stanislav_labs

thc013 replied at 2017-2-26 19:12
https://pan.baidu.com/share/link?shareid=2502121798&uk=1778654534#list/path=%2FTV-BOX%2FH5&parentPat ...

LAN not WORK !

Morozheno

stanislav_labs replied at 2017-2-28 17:06
LAN not WORK !

выложи образ куда нить поближе пожалуйста

thc013

@stanislav_labs

said wrong fez so if you adjust mii in rgmii int the fex it should work

stanislav_labs

thc013 replied at 2017-3-1 23:59
@stanislav_labs

said wrong fez so if you adjust mii in rgmii int the fex it should work

I change phy-mode to rgmii, but its not work
;------------------------------------------------------------------------------;
; 10/100/100Mbps Ethernet MAC Controller Configure                             ;
;------------------------------------------------------------------------------;
;   配置选项：                                                                 ;
;   gmac_used  ---  1: gmac used, 0: not used                                  ;
;   gmac_powerx --  A[:B] A: axp channel, B: voltage value                     ;
;   phy-mode    --  rgmii, rmii, mii                                           ;
;   tx-delay    --  transmit clock delay: 0~7                                  ;
;   rx-delay    --  receive clock delay:  0~31                                 ;
;------------------------------------------------------------------------------;
[gmac0]
gmac0_used         = 1
phy-mode           = "rgmii"
gmac_power1        =
gmac_power2        =
gmac_power3        =
tx-delay           = 0
rx-delay           = 0

i try to import  lan config from original firmware , but its not work too..
;------------------------------------------------------------------------------;
; 10/100/100Mbps Ethernet MAC Controller Configure                             ;
;------------------------------------------------------------------------------;
;   配置选项：                                                                 ;
;   gmac_used  ---  1: gmac used, 0: not used                                  ;
;   gmac_powerx --  A[:B] A: axp channel, B: voltage value                     ;
;   phy-mode    --  rgmii, rmii, mii                                           ;
;   tx-delay    --  transmit clock delay: 0~7                                  ;
;   rx-delay    --  receive clock delay:  0~31                                 ;
;------------------------------------------------------------------------------;
[gmac0]
gmac0_used         = 1
phy-mode           = "rgmii"
;gmac_rxd3          = portD00<2><default><3><default>
;gmac_rxd2          = portD01<2><default><3><default>
;gmac_rxd1          = portD02<2><default><3><default>
;gmac_rxd0          = portD03<2><default><3><default>
;gmac_rxdv          = portD05<2><default><3><default>
;gmac_rxclk         = portD04<2><default><3><default>
;gmac_rxerr         = portD06<2><default><3><default>
;gmac_txd3          = portD07<2><default><3><default>
;gmac_txd2          = portD08<2><default><3><default>
;gmac_txd1          = portD09<2><default><3><default>
;gmac_txd0          = port:PD10<2><default><3><default>
;gmac_txclk         = port:PD12<2><default><3><default>
;gmac_txen          = port:PD13<2><default><3><default>
;gmac_clkin         = port:PD15<2><default><3><default>
;gmac_mdc           = port:PD16<2><default><3><default>
;gmac_mdio          = port:PD17<2><default><3><default>
gmac_power1        =  
gmac_power2        =  
gmac_power3        =  
tx-delay           = 0
rx-delay           = 0

thc013

nah good to know

i only found those images on baidu and that is what i saw as difference for network

there are more changes in the fex and if you look at the filename they configured it for a 8189etv .

and i don't understand chinees but maybye the changed kernel settings

you could try to replace the kernel with the orangepi one and see if that works

but after all its only messing wiith prebuild images without source

you could beter invest your time in building one from source than make shitty firmwares more shitty

it is a shame there is no proper images linux or android for the H5 .