Custom Beelink X2 v205k4 for OPI-PC

nobitakun

The microSD cards I have are all from Kingston and Sandisk. I tried a couple of 2GB card from Kingston and a new one I bought a month ago from Sandisk, which is 16GB. I use this one to install Lubuntu, Debian and the default Android from Orange PI website and never had a problem.

So, I don't really know what's happening...

I use Windows XP for doing all these tasks by the way. The program I use to build the image into the SD card is PhoenixCard 3.1.0.

crazykill

Maybe you burned the board.Are you using some kind of heat sink, it can get quite hot under load.

nobitakun

looooooooool!!!

I tried something since I have no heatsink. I put my summer fan working towards my Orange PI at dinning room with max velocity and it worked lol. I left it 2-3 minutes before I turned OPI PC on, it took like 3-4 minutes to boot but it's working now.

Thank you for your help!

littlestone

So the settings were not underclock/undervolt enough for you, nobitakun.

janche

Tested it with OPI PC:
- 3 of 4 USB are working, 4-th - upper of two-paired is not working (the same as with superceleron's ROM).
- /etc/init.d seems is not working at all: scripts placed there do not run at boot time.

crazykill

Yea that thermal throttle sure slows down the boot up.

redo

its compatible whit opi pc ?

Swell6

What's the performance like in general compared to the unmodified ROM?

janche

Swell6 replied at 2016-1-23 05:36
What's the performance like in general compared to the unmodified ROM?

AnTuTu - 18250

Swell6

Makes sense. Got about 23000 with the unmodified rom