Resolution Orange PI PC 2 & Orange PI Zero

manel00

Hi everyone!

I'd like to know what should I do to fix the problem that every monitor I've tested, all are cropping the resolution.

Thank you very much

admin

Did you use the Desk top image or Server image? And what about the resolution of your monitor?

manel00

I'm using a TV 32" OKI brand, and always i'm using desktop image, thanks for reply

jhead716

I found this and it works for me.  It would be nice to have just a little documentation on this stuff. [url]https://forum.armbian.com/index.php?/topic/3837-psa-orange-pi-zero-expansion-board-tv-out-not-working-solution/[/url]

$ bin2fex /boot/script.bin ~/script.fex
$ nano ~/script.fex

find these lines:
fb0_width = 0
fb0_height = 0

and change them to:
fb0_width = 680
fb0_height = 536

then:
$ fex2bin ~/script.fex ~/script.bin
$ sudo cp ~/script.bin /boot
$ sudo reboot

Then install devmem2:

wget http://free-electrons.com/pub/mirror/devmem2.c
gcc ./devmem2.c
sudo mv ./a.out /usr/local/bin/devmem2

Then:

sudo devmem2 0x01E00130 w 0x00140028


And last, to make permanent:
$ sudo nano /etc/rc.local

paste following line:
devmem2 0x01E00130 w 0x00140028

You should really read the full posts to make sure that you are doing it right for your OS but it works.

manel00

what I'm using is Android OS custom of Xunlong, will it serves? (I don't think so)...

thanks for such a nice info ;)