Edited by marekwolek at 2015-11-11 19:29
loboris replied at 2015-11-5 01:45
If you can connect it to another monitor, or if you can connect via ssh, download update_kernel.sh ...
Hi
I tried on Debian ,fedora , Ubuntu.
After installation fresh systems Network carddoes not work.I can’t use update_kernel.sh .
Copying files uImage from opi_kernel to file BOOTsolves the problem with network card.
Starting update_kernel.sh it does no change anything. HDMI further does not work.
Cable HDMI-DVI is ok.
Modyfication script.fex (script.bin.OPI-PLUS_1080p60_hdmi) does not work.
[*]hdcp_enable = 0
[*]hdmi_cts_compatibility = 1
Edited by jacer at 2015-11-10 22:21
Download and extract attached file, rename one of them to script.bin then copy to the FAT type boot partition. Then you will be all set.
jacer replied at 2015-11-10 15:19
Download and extract attached file, rename one of them to script.bin then copy to the FAT type boot...
Scriptsdo not work. monitor is black . HDMI is dead.
I triedin Debian and Ubuntu
advert_disp = 0
auto_hpd = 1
output_type = 4
hdmi_channel = 0
hdmi_mode = 4
cvbs_channel = 1
cvbs_mode = 11
output_full = 1
hdmi_mode_check = 1
disp_init_enable = 1
disp_mode = 0
screen0_output_type = 3
screen0_output_mode = 10
screen1_output_type = 3
screen1_output_mode = 10
fb0_format = 0
fb0_width = 0
fb0_height = 0
fb1_format = 0
fb1_width = 0
fb1_height = 0
hdmi_used = 1
hdmi_power = "vcc-hdmi-18"
hdmi_cts_compatibility = 1
My hardware :
Orange pi plus , cable HDMI-DVI , monitor lg E22401920x1080@60
marekwolek replied at 2015-11-11 01:52
Scriptsdo not work. monitor is black . HDMI is dead.
I triedin Debian and Ubuntu
Download attached files and extract to FAT partition of your TF card.
Edited by marekwolek at 2015-11-12 13:19
jacer replied at 2015-11-11 14:23
Download attached files and extract to FAT partition of your TF card.
This file is not work .Network card is work but HDMI does not work . :'( Screen is black.
I triedin Debian and Ubuntu.
I will taste tomorrowconverter HDMI - VGA.It will work maybe.
My procedure:
1 Format TF card.
2 Install new system: Debian_jessie_mini.img or OrangePI_Ubuntu_Vivid_Mate.img
3
delete all file in catalogue /boot
Copy file uImage.binand script.bin , script.bin.OPi_PLUS****to catalogue /boot ( orginal uImage.bin -network card not work)
4 Connect monitor to orange pi plus and cable network.
5 connect power and run system
I've got the same issue. Screen doesn't display anything, but I've got temporary solution of this problem, but isn't comfortable. You have to turn off your display, connect hdmi cable only, wait about 2-3 minutes to boot your system up and then turn on the display. It should work. Does anybody have other solution?
ergodyn replied at 2015-11-12 23:19
I've got the same issue. Screen doesn't display anything, but I've got temporary solution of this pr ...
Hi
I tried so to do first day.
hdcp_enable = 0
hdmi_cts_compatibility = 1
Efect : green artefacts in screen.
I will test your methodin file whichloboris sended to my.
The worst this is that i have several premisesto think that it hardware problem.
Controler SATA is Very Hot . it is normal ?
if i connect monitor diode D3 it warms. Very Very warms .
If diode D3 very hot thenmonitor display NO SIGNAL( hdmi-vga) (hdmi-dvi; monitor is black , no message ).
try this uImage and script.bin
https://www.sendspace.com/file/ub5l39
it has 1280x1024 res for 4:3 displays
works with a hdmi to vga converter cable
I'm interested in using 1280x1024 res for 4:3 displays with a hdmi to vga converter cable, but I have an OrangePiPlus. Can I use this too?
https://www.sendspace.com/file/ub5l39
jacer replied at 2015-11-11 21:23
Download attached files and extract to FAT partition of your TF card.
ok,
thank you for your help but is not running.
I think my orange pi pc card is dead! (video)
but the processeur is running. (connecting with ssh)