Orange Pi Plus 2 not booting
HelloI have the following problem:
I'm using the Official Orange Pi Plus 2 Raspbian image and get from the Debug TTL Port following message
HELLO! BOOT0 is starting!
boot0 version : 4.0.0
fel_flag = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
rtc value = 0x00000000
DRAM DRIVE INFO: V0.8
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
READ DQS LCDL = 001f1f1f
DRAM SIZE =2048 M
odt delay
dram size =2048
card boot number = 0
card no is 0
sdcard 0 line count 4
: mmc driver ver 2014-12-10 21:20:39
: ***Try SD card 0***
: SD/MMC Card: 4bit, capacity: 1876MB
: vendor: Man 0002544d Snr a49e7ea3
: product: SD02G
: revision: 3.8
: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000dc000.
sum=ede66ee7
src_sum=ede66ee7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
already secure mode
[ 0.408]
U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
[ 0.416]version: 1.1.0
normal mode
[ 0.423]pmbus: ready
not set main pmu id
axp_probe error
[ 0.438]PMU: pll1 1200 Mhz,PLL6=600 Mhz
AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.468]DRAM:2 GiB
relocation Offset is: 75af9000
read rtc = 0x0
mag be start_type no use
user_gpio config
use
i also tried differnet images from the Official Orange Pi download page
What can i do to run this Board properly ?
BR
#bump
no one got a clue ? Perhaps try an alternative?
https://www.armbian.com/orange-pi-plus-2/ igorpec replied at 2018-3-21 14:10
Perhaps try an alternative?
https://www.armbian.com/orange-pi-plus-2/
Stucks at
U-Boot SPL 2017.11-armbian (Jan 25 2018 - 07:57:48)
DRAM: 2048 MiB
Trying to boot from MMC1
U-Boot 2017.11-armbian (Jan 25 2018 - 07:57:48 +0100) Allwinner Technology
CPU: Allwinner H3 (SUN8I 1680)
Model: Xunlong Orange Pi Plus / Plus 2
DRAM:2 GiB
any clue ?
Hardware issue, perhaps memory is not in a good shape. SD card troubles would manifest differently.
page:
[1]